Model Number:

E044N

Application Standard :

EN 196-3 | EN 480-2 | EN 13279-2 (gypsum) | ASTM C187, C191 | DIN 1168, 1196 | NF P15-414, P15-431 | AASHTO T131

Features :

Large high contrast and high resolution LCD screen.
Real time graphic display of the test.
Fully automatic test performance.
Customizable programs for research tests.
Suitable to operate through the embedded control unit or a separate PC.

Specifications

The mobile probe weighs 300 g (1000 g following the EN, NF Standards), the penetration needle has 1.13 mm diameter (1 mm following ASTM Standard) and its fall can be programmed in free fall or in guided fall.
the penetrations time can be selected between 0.5 minutes and 999 minutes (fix interval between two penetrations of a test) or can change during the test up to 5 different phases with different interval time; it can even change automatically during the setting time fixing a penetration depth.
The penetration measure is read by a very accurate encoder having a resolution of 0.1 mm
The Vicatronic also calculates, visualises and prints:
- The time from the moment of the sample preparation (set by the operator).
- The time the test starts.
- The residual time to the next penetration.
- The residual time to the end of the test
- The number of penetrations made and the residual penetrations to be made.
The firmware allows activating a delay on the appliance to the beginning of the test.
The Vicatronic can memorise all the test parameters and results and keeps a file with a capacity of more than 50 complete tests.
PC CONNECTION AND NET OPTIONS
The Vicatronic is supplied complete with the incorporated printer, two hardened needles (one with 1 mm diameter and one with 1.13 mm diameter), two conical moulds EN and ASTM, a glass plate to hold the conical mould.
Power supply: 230V 1Ph 50-60Hz 50W, Dimensions: 400x200x470 mm
Weight: 13 kg approx